Copper Ripstop Fabric Shieldex Kassel
Characteristics: Corrosion proof copper-silver plated polyamide ripstop fabric, < 0.03 Ohms/cm2 surface resistivity.
Shieldex Technik-tex P130
Characteristics: Silver plated knitted fabric, 78% Polyamide + 22% Elastomer plated with 99% pure silver, 2 Ohms/cm2 surface resistivity (front/visible side). stretchy in both direction
Characteristics: Silver plated knitted fabric, 78% Polyamide + 22% Elastomer plated with 99% pure silver, < 2 Ohms/cm2 surface resistivity (front/visible side). stretchy in one direction
Silver Ripstop Shieldex Bremen
Characteristics: Silver plated polyamide fabric (RS), Parachute silk with 99% pure silver, < 0.3 Ohms/cm2 surface resistivity.
SOFT&SAFE™ SHIELDING FABRIC
Characteristics: Bamboo fiber with pure Silver threads, woven. Resistivity is <1 Ohm/sq. Pink, non-stretchy woven fabric.
Characteristics: black, nearly transparent veil like material. Resistivityis 0.1 Ohm/sq. Polyester base plated with Zinc/Nickel/Copper.
Characteristics:Stretchy jersey. 16% Silver/nylon + 84% Rayon, Surface resistivity is <5 Ohm per sq
Eeonyx non woven carbon resistive
Characteristics: Resistive material (2k), non woven, can be used to make pressure or bend sensor
Eeonyx stretch woven carbon resistive
Characteristics: Resistive material (2k), knit/ jersey, Stretch in both direction. Can be used to make pressure or stretch sensor
Eeonyx stretch woven carbon resistive
Characteristics: Resistive material. Euro jersey. Thicker than the above stretch eeonyx. Stretch in one direction. Can be used to make pressure or stretch sensor
Company: Adjon Leather
Characteristics: The real leather coated with carbon, similar to eeonyx fabrics. piezoresistive.
High Flex 3981 7X1 Silver 14/000
company: Karl Grimm
Characteristic: Very conductive, Solder-able
Syscom Silver Thread
company: Syscom Advanced Materials
Characteristic: thin silver fiber twisted together. very conductive. Solder-able.
Elitex Fadenmaterial Art Nr. 235/34 PA/Ag
company: Imbut GmbH
Characteristic: silver conductive thread (100% polyamid beschichtet mit silber
Shieldex Assortment of sample threads
Shieldex 110/34 dtex 2-ply HC: Silver plated, 500 Ω/m ± 100 Ω/m
Shieldex 110/34 dtex Z-turns ht HCB: Silver plated, < 1 kΩ/m
Shieldex 117/17 dtex 2-ply: Silver plated, average 185 Ω/m
Shieldex 235/34 dtex 2-ply Silver plated, HCB: 100 Ω/m ± 30 Ω/m
Shieldex 235/34 dtex 4-ply HC: Silver plated, 50 Ω/m ± 10 Ω/m
Bekinox VN 184.108.40.206S.HT
Characteristics: Stainless steel yarn, good for heating use, plied
Bekinox VN 220.127.116.11S GR C
Characteristics: Stainless steel yarn, good for heating use, plied, thinner than above thread.
Bekiflex CA 63/8X7/80S/0.245/PFA
Characteristics: Copper fiber with transparent isolation layer.
linnen + inox thread
Company: Bart Francis
Characteristics: 60/2 NeL = 36/2Nm = 20/2 Nec, Linnen and inox fiber plied together.
Nm10/3 conductive yarn
Company: plug and wear
Characteristics: Nm10/3 conductive yarn, 80% polyester 20% stainless steel, light grey, Surface resistance < 100000ohm
Characteristics: 87% combed cotton, 5% silver, 5% nylon, 3% Spandex.
Bekinox Nm50/3 cotton
Characteristics: Resistive, Very thin yarn, 3 ply,
Bekinox Nm50/1 cotton
Characteristics: Resistive, Very thin yarn, 2 ply,
Bekinox PES 12/50
Characteristic: Polyester fiber mixed with stainless steel fiber
Characteristic: Wool fiber mixed with stainless steel fiber, Suitable for felting
company : Bare Conductive
Characteristic: Water-based, Water-soluble ink. 55 Ω/Sq @ 50 microns.
CuPro-Cote copper paint
company : LessEMF
Characteristic : Thin with water. Good surface resistivity of < 1 Ohm/sq at 1 mil dry film thickness.
State Changing Ink
company : Matsui
Characteristic: Hydro Chromic White has a special wet reveal binder that alternates from white to transparent when wet, then back to the original white when dry
company : LCR Hallcrest
Company: Lumi Inkodye
Company: Maison ecolo.com
Characteristics: Why we have Lubricant?! well, this is the best medium to mix with the copper conductive paint. Anne-Marie made a research on this, and she found out that this works the best!
Other conductive materials
Conductive Fabric Tape
company : Amohr
company : AdaFruit
characteristics: Good for paper circuit making. Solder-able.
Conductive Ribbon (Black & White)
company : R4ReTextiles
Characteristics : 4 conductor line (conductive thread) on one ribbon. Isolated. Good for replacement of ribbon cables.
Company : lessEMF
We bought it from lessEMF, but 3M produces it and there are more retailers.
Characteristics: Piezo resistive. Changes its resistance when pressed. Good for pressure sensors.
HOOK & LOOP FASTENER
Characteristics: Resistivity: Hook (1.8 Ohm per sq), Loop (1.4 Ohm per sq), 0.8 Ohm through mated closure.
Quantum Tunneling Composite
Characteristics: This flexible polymer exhibits extraordinary electrical resistance change when deformed by squeezing, pulling or twisting.
Company: we bought it from Durable Fasteners
The product name of these snaps in their store is BB110 LA P-SSL/ BB110 B P-SSL/ BB110 CW P-SSL. (the snaps comes in three parts). This is an Ring Prong fastener 7mm in size.
Unfortunately, the minimum order from stock is 2,000 sets in this shop, and we actually bought 2000 each with handpress and 7mm die as KOBAKANT expenses.
Company : Sedo Chemicals
Characteristics: This is a material used in wetsuit. non-conductive.
We bought it from
We bought it from Modulor
Dragon Skin silicon
Company: Little Windows
Characteristics: Easy to use epoxy. Good for fixing the fabric circuit components connections.
To mark the mannequin with basic blocks. Marked with 1cm black/white blocks.
purchased from Amazon
Characteristics: Strong fusible interfacing. Good for making laser cut/ vinyl cut conductive fabric circuit
(They do not do small amount retails, but Rachel is willing to organize a group order soon!)
Characteristics: Strong fusible interfacing. Good for making laser cut/ vinyl cut conductive fabric circuit. Thinner than the above heatbond. Some of them are stretchy.
Bobbin Lace Bobbins
It is now with Irene. If you want to use them, contact her
Mono Audio Amp
FLORA Accelerometer/Compass Sensor
Flora Color Sensor
Flora UV Index Sensor
Flora RGB Smart NeoPixel
USB lipo charger
trinket pro 3V
Energy Harvesting circuit
chibitoronics Starter Kit
Shift Register, Good for controlling 7 segments or LED matrix.
Arduino Tutorial here >>
8 channel Multiplexer, good for multiplexing analog/digital inputs.
Arudino Tutorial here>>
Darlington Transistor, Ntype. Good for digital switch.
14pin socket/8 pin socket
To use with ATTINY 45/85/84
LED (3mm) white
LED (5mm) white
LED smd white
LED 1206 ws/600mcd
JST plug/socket B2B-PH-K-S
This is the plug that comes with Lipo batteries.
H-bridge, good for controlling DC morot’s directions.
Good tutorial here>>
3V coin cell holder
This one is sewable, and seemed to be a favorite of many practitioners.
To step down the power supply voltage. We bought this at the local electronics shop Segor
Characteristics: 3.7V, 320mAh, rechargeable
Litze LiFY 1 x 0.05 mm² black wire
Characteristics: very thin and flexible copper wire. multi core.